Epson V700 Product Information Guide - Page 5

Epson Perfection V700 Photo/V750 Pro 3. Use a soft cloth to wipe the transparency unit window and the document table before placing your film or slides. 3. Place the cover(s) over the film and press them down until they click. Then press down on all the edges of the covers to secure them. 4. Place the film holder on the document table so that it is aligned with the upper right corner and the pins are seated in the holes on the scanner. To place film or slides for scanning, see the sections below. Placing Film in the Holder Placing 35mm Film Strips 1. Remove the film strip cover(s) on the film holder. 2. Slide up to four film strips all the way into the film holder with the shiny base side facing down. Your images and any wording on the film strips should appear backwards on the side that faces up, as shown by the illustration on the film holder. Note: Hold the edge of the film gently or use gloves to touch the film; otherwise you may damage the film. Make sure the white stickers on the back of the film holder and the areas around them are not scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble recognizing your film in Full Auto Mode. Do not cover any of the tiny holes in the film holder or the scanner may have trouble recognizing which film holder you are using. 5. Make sure you removed the document mat. See "Removing the Document Mat" on page 4. 6. Close the scanner cover. When you are finished scanning film, be sure to replace the document mat before scanning documents or photos. See "Replacing the Document Mat" on page 9. Placing Medium Format Film 1. Open the cover on the medium format film holder. 2. Slide up to two medium format film images into the film holder with the shiny base side facing down. Your images and any wording on the film should appear backwards on 12/05 Epson Perfection V700 Photo/V750 Pro - 5