Epson VS340 User Manual - Page 167

Power light Off Status light Lamp light Flashing blue Orange Flashing blue Light status varies Flashing orange Off Flashing blue Off Off Flashing blue Flashing orange Off Flashing blue Flashing orange Off Flashing blue Orange Temp light Off Light status varies Flashing orange Off Flashing orange Orange Status and solution Lamp has a problem. • Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Replace the lamp soon to avoid damage. Do not continue using the projector. A fan or sensor has a problem. Turn the projector off, unplug it, and contact Epson for help. Internal projector error. Turn the projector off, unplug it, and contact Epson for help. Auto iris error. Turn the projector off, unplug it, and contact Epson for help. Power error. Turn the projector off, unplug it, and contact Epson for help. Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems 167