Epson WorkForce ES-55R Users Guide - Page 28
Enabling a Direct Wi-Fi Connection, Disabling Wi-Fi, Restoring Default Network Settings
View all Epson WorkForce ES-55R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Parent topic: Wi-Fi Networking Enabling a Direct Wi-Fi Connection You can enable a direct Wi-Fi connection to allow direct communication between your scanner and computer or other devices without a wireless router. Note: While you are connected to the scanner, your computer cannot access the internet. 1. Set the Wi-Fi switch on the scanner to the Wi-Fi position. 2. Turn on the scanner. 3. From your computer or device, search for and select the SSID shown on the label on the bottom of the scanner. Note: It may take a few minutes for the scanner SSID to appear in the list. 4. Enter the password shown on the label on the bottom of the scanner. The computer connects to the scanner's wireless network. If the connection is unsuccessful, make sure you entered the password correctly. Parent topic: Direct Wi-Fi Mode Setup Disabling Wi-Fi You may need to disable your product's Wi-Fi if you need to solve a problem with your network connection. Note: Before disabling Wi-Fi, make a note of any network settings selected for Epson DocumentScan. Set the Wi-Fi switch on the scanner to the off position. Parent topic: Direct Wi-Fi Mode Setup Restoring Default Network Settings If you need to solve a problem with your network connection, you can restore all network settings to their defaults. 1. Make sure the scanner is turned off. 2. Set the Wi-Fi switch on the scanner to the Wi-Fi position. 28