Epson WorkForce ES-55R Users Guide - Page 87
Cannot Scan Over a Network, Scanner Cannot Connect to a Wireless Router, Solving Problems
View all Epson WorkForce ES-55R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Parent topic: Solving Problems Cannot Scan Over a Network If you cannot scan over a network (ES-60W/ES-65WR) with Epson ScanSmart or start the Epson Scan 2 Utility, try these solutions: • Make sure the Wi-Fi switch is set to the Wi-Fi position. • Make sure the computer and scanner are connected to the same network (or network segment/VLAN). • Move the scanner and computer or smart device closer to the router or access point. • If you cannot scan using the start button on the scanner, make sure you restarted your computer after installing the scanning software. • If you are scanning a large original at a high resolution, a network communication error may occur. Try scanning again at a lower resolution. • Check the network connection setting in the Epson Scan 2 Utility. • You may need to disable the firewall and any anti-virus software on your wireless router or access point. • If you see the message "Network product is not available: currently being used by user", there may be a communication error between the scanner and computer. Restart the scanner. • If the Firewall function is active, the scanner may not be discovered by the Epson Scan 2 Utility. Open the Epson Scan 2 Utility, enter the IP address for your scanner, and click Add. • If the scanner and computer cannot communicate and are connected to the same network (or network segment/VLAN), the privacy separator on your router must be disabled. Follow the instructions in your router documentation to disable the privacy separator. Parent topic: Solving Network Scanning Problems Related topics Wi-Fi Networking Scanner Cannot Connect to a Wireless Router If your scanner has trouble finding or connecting to a wireless router (ES-60W/ES-65WR), try these solutions: • If you did not successfully connect to a network while installing your product software, select the link at the end of this topic and follow the steps in "Manually Connecting to a Wi-Fi Network". 87