Epson WorkForce Enterprise AM-C4000 Users Guide - Page 56
Proxy Server Settings, Obtain IP Address
View all Epson WorkForce Enterprise AM-C4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Preparing the Printer and Making Initial Settings > Creating a Network Connection and Making S... 3. Select Advanced > TCP/IP. Note: You need to enter the administrator password for the network. 4. Select Manual for Obtain IP Address. When you set the IP address automatically by using the DHCP function of router, select Auto. In that case, the IP Address, Subnet Mask, and Default Gateway on step 5 to 6 are also set automatically, so go to step 7. 5. Enter the IP address. Confirm the value reflected on the previous screen. 6. Set up the Subnet Mask and Default Gateway. Confirm the value reflected on the previous screen. c Important: If the combination of the IP Address, Subnet Mask and Default Gateway is incorrect, Start Setup is inactive and cannot proceed with the settings. Confirm that there is no error in the entry. 7. Enter the IP address for the primary DNS server. Confirm the value reflected on the previous screen. When you select Auto for the IP address assignment settings, you can select the DNS server settings from Manual or Auto. If you cannot obtain the DNS server address automatically, select Manual and enter the DNS server address. Then, enter the secondary DNS server address directly. If you select Auto, go to step 9. 8. Enter the IP address for the secondary DNS server. Confirm the value reflected on the previous screen. 9. Tap Start Setup. Setting the Proxy Server Set up the proxy server if both of the following are true. ❏ The proxy server is built for Internet connection. ❏ When using a function in which a printer directly connects to the Internet, such as Epson Connect service or another company's cloud services. The proxy server is only available on the standard network. 1. Select Settings on the home screen. When making settings after IP address setting, the Advanced screen is displayed. Go to step 3. 2. Select General Settings > Network Settings > Standard > Advanced Note: You need to enter the administrator password for the network. 3. Select Proxy Server. 4. Select Use for Proxy Server Settings. 56