Epson WorkForce Pro WF-4833 Users Guide - Page 151
Setting Up a WSD Port (Windows 7/Windows Vista), Save as JPEG
View all Epson WorkForce Pro WF-4833 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
• Save as JPEG to save the scanned image as a JPEG file. • Save as PDF to save the scanned document or image as a PDF file. 6. Change any of the displayed settings as necessary. 7. Select Save. Your product scans the original and sends the file to the connected computer. Parent topic: Starting a Scan Using the Product Control Panel Related references Control Panel Scanning Options Related topics Placing Originals on the Product Setting Up a WSD Port (Windows 7/Windows Vista) You can scan to a networked Windows computer using WSD (Web Services for Devices). You must first set up a WSD port on your Windows 7 or Windows Vista system (the port is set up automatically on Windows 10 and Windows 8.x). Before you set up a WSD port, make sure you installed your product software, and connected your product and computer to the same network. 1. Turn on your product. 2. Print a network status sheet so you can identify the network name and model name for your product on the network. 3. Click or Start and select Computer. 4. On the left side of the window, select Network. 5. Locate your product on the Network screen, right-click it, and select Install. 6. When you see the User Account Control screen, click Continue. Note: If you see an Uninstall screen, click Uninstall and repeat these steps as necessary. 7. When you see the message Your device is ready to use in the Windows taskbar, click the message. 8. On the Driver Software Installation screen, make sure your product is listed as Ready to use. Then click Close. 151