Epson WorkForce Pro WF-6530 User Manual - Page 350
Line Type, color fax.
View all Epson WorkForce Pro WF-6530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 350 highlights
• Make sure you have set up your header information and have not blocked your caller ID. Otherwise, your faxes might be rejected by the recipient's fax machine. • If user restriction has been enabled, you may need to enter a user name and password. Contact your administrator for assistance. • If you did not connect a telephone to your product, set the Receive Mode setting to Auto so you can receive faxes automatically. • Check that the cable connecting your telephone wall jack to your product's LINE port is secure. • Print a fax connection report using your product control panel or fax software to help diagnose the problem. • Verify that the telephone wall jack works by connecting a phone to it and testing it. • If there is no dial tone and you connected the product to a PBX (Private Branch Exchange) phone line or Terminal Adapter, change the Line Type setting to PBX. If you still cannot send a fax, turn off the turn off the product's dial tone detection setting. (Turning off the dial tone setting may cause the product to drop the first digit of a fax number.) • If you connected your product to a DSL phone line, you must connect a DSL filter to the phone jack to enable faxing over the line. Contact your DSL provider for the necessary filter. • If your telephone line has static, turn off your product's error correction mode fax communication setting and try faxing again. • Try lowering your product's fax speed setting. • Make sure the error correction mode (ECM) setting is turned on if you are trying to send or receive a color fax. • If your telephone line uses call waiting and you have trouble receiving faxes, turn off call waiting to prevent disruption of incoming faxes. • If you have subscribed to a call forwarding service, the product may not be able to receive faxes. Contact your service provider for assistance. • Check your inbox and delete faxes after reading or printing them. If the inbox is full, the product cannot receive faxes. • If you cannot send faxes at a specified time, make sure the date and time are set correctly on the product. Note: Do not turn the product off while it is receiving a fax. Otherwise, the fax transmission will be lost. 350