Epson WorkForce Pro WF-C5790 Users Guide for U.S. and Canada - Page 249
Rings to Answer, Double&Triple
View all Epson WorkForce Pro WF-C5790 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Setting Line Type Header Receive Mode Distinctive Ring Rings to Answer Remote Receive Options PSTN PBX Your Phone Number Fax Header Manual Auto All Single Double Triple Double&Triple 1 to 9 Off On Start Code Description Selects a standard phone line (Public Switched Telephone Network) Selects Private Branch Exchange, the type of phone line used in office environments where an access code such as 9 must be used to call an outside line Select to enter the header information and your phone number for inclusion on outgoing faxes Lets you confirm whether an incoming fax should be printed; a telephone must be connected to the product Automatically receives and prints faxes If you are using a Distinctive Ring Service on your phone line, your telephone company can assign two or more phone numbers to the same line and assign different ring patterns to each. If you use this service, select the number of rings for your fax number so your product can receive faxes on the correct number of rings. Select All for phones lines that do not use this service. Sets the number of rings before your product receives a fax. If Receive Mode is set to Auto and an answering machine is connected to the product, make sure this setting is set higher than the number of rings your answering machine is set to answer a call. Lets you start receiving faxes using your phone instead of operating the product (if the Receive Mode is set to Auto). When you select On, you must also set a Start Code. If you are using a cordless handset with its base connected to the product, you can start receiving the fax by entering the code using the handset. 249