Epson WorkForce WF-7720 Users Guide - Page 57
Accessing the Web Config Utility, Changing a USB Connection to a Wi-Fi Connection
View all Epson WorkForce WF-7720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Disabling Wi-Fi Features Parent topic: Wi-Fi or Wired Networking Accessing the Web Config Utility You can select your product's network settings and confirm its operating status using a web browser. You do this by accessing your product's built-in Web Config utility from a computer or other device that is connected to the same network as your product. Note: For more information on administration settings, see the Administrator's Guide. 1. Print a network status sheet. 2. Locate the IP address for your product that is listed on the network status sheet. 3. On a computer or other device connected to the same network as your product, open a web browser. 4. Enter your product's IP address into the address bar. You see the available Web Config utility options. Parent topic: Changing or Updating Network Connections Changing a USB Connection to a Wi-Fi Connection If you have already connected your product to your computer using a USB connection, you can change to a Wi-Fi connection. 1. Disconnect the USB cable from your product. 2. Uninstall your product software. 3. Download and install your product software from the Epson website using the instructions on the Start Here sheet. Parent topic: Changing or Updating Network Connections Changing a Wi-Fi Connection to a Wired Network Connection If you have already connected your product to your computer wirelessly, you can change to a wired network connection if necessary. 1. Disable your product's Wi-Fi features. 2. Connect one end of an Ethernet network cable to the product's LAN port. 57