Fisher and Paykel DE27CW1 User Guide - Page 13
Mobile Home Installation
View all Fisher and Paykel DE27CW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Dimensions US CA Mobile Home Installation The installation of the dryer in a mobile home must conform to the Manufactured Home Construction and Safety Standard Title 24 CFR, Part 3280 {formerly the Federal Standard for Mobile Home Construction and Safety, Title 24 HUD (Part 280), 1975} for the United States or Standard CAN/CSA - Z240MH for Canada. When installing a dryer in a mobile home, provisions for anchoring the dryer to the floor must be made. A Mobile Home anchoring installation kit is available with instructions (see Accessories page 9). Locate in an area that has adequate outside make up air (a minimum of 72 square inches of unobstructed opening is required). Mobile home installations must be exhausted to the outdoors with the exhaust duct termination securely fastened to the mobile home structure, using materials that will not support combustion. The exhaust duct must not terminate beneath the mobile home. See the section on exhausting for more information. The dryer must be exhausted outside floor enclosed area outside wall The exhaust vent must be securely fastened to a non-combustible portion of the mobile home structure and must not terminate beneath the mobile home. skirting 13