Fisher and Paykel RF135BDRUX1 Joiner Kit Instructions (English) - Page 7

Joiner Kit For Fisher & Paykel Models: C270, E249T, E240B, E210, E381T, E372B, N388, E388, C450, E450, E402B, E411T, E415H, E413T, E406B, E440T, E442B, E521T & E522B Step 14 Locate the Trim Panel Assembly under the Front Upper Bracket. The Front Upper Bracket should be free to move up and down to aid installation (see diagram 13). Step 17 Complete the installation by locating the assembled combined cabinets within the Cupboard Cavity (refer to page 2 for Cupboard Cavity dimensions). Step 14 Step 15 Tighten the 6 Type B Screws to locate the Front Upper Bracket. Secure the Trim Panel Assembly with one screw (Type A, Self Tapping, Silver). Step 17 Step 18 If doors are out of line after installation is complete, undo top door hinge bracket of the un-aligned door by unscrewing all 3 screws halfway. Align by moving the door left or right. Once aligned, re-screw the hinge bracket. Ensure the front leveling feet are adjusted to take the load of the combined cabinets. Note: Adjusting the leveling feet can also affect the door alignment. Step 15 COMPLETE THE INSTALLATION PROCEDURE Step 16 Close the Refrigerator doors, ensuring that all door seals sit flush against the front walls of the Cabinets. Step 18 Introduction Date: October 2007 Pt No.819265 INSTRUCTION KIT JOINER RF 7