Fluke 117 Fluke 114,115,117 Manual - Page 9

True-rms Multimeters Rotary Switch Positions Rotary Switch Positions Switch Position Measurement Function Model x e Hz (button) D l Automatically selects ac or dc volts based on the sensed input with a low impedance input. AC voltage from 0.06 to 600 V. Frequency from 5 Hz to 50 kHz. DC voltage from .001 V to 600 V. AC voltage from 6.0 to 600 mV, dc-coupled. DC voltage from 0.1 to 600 mV. 114 & 117 114, 115 & 117 115 & 117 114, 115 & 117 114, 115 & 117 Ω Ohms from 0.1 Ω to 40 MΩ. s Continuity beeper turns on at < 20 Ω and turns off at >250 Ω. 114, 115 & 117 114, 115 & 117 R S j Hz (button) I w Diode Test. Displays OL above 2.0 V. Farads from 1 nF to 9999 μF. AC current from 0.1 A to 10 A (>10 to 20 A, 30 seconds on, 10 minutes off). >10.00 A display flashes. >20 A, OL is displayed. DC-coupled. Frequency from 45 Hz to 5 kHz. DC current from 0.001 A to 10 A (>10 to 20 A, 30 seconds on, 10 minutes off). >10.00 A display flashes. >20 A, OL is displayed. Non-contact sensing of ac voltage. 115 & 117 115 & 117 115 & 117 115 & 117 117 Note: All ac functions and Auto-V LoZ are true-rms. AC voltage is ac-coupled. Auto-V LoZ, AC mV and AC amps are dc-coupled. 7