Foscam FI9803P USER MANUAL - Page 26
Device Status, 4.2.4 Log, Camera ID, Basic Settings, System Firmware Version
![]() |
View all Foscam FI9803P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
www.foscam.us Click Basic Settings and go to Device Name panel where you can change your camera name. The default device name is anonymous. Camera ID: Display the MAC address of your camera. For example Device ID is 008414350787, the same MAC ID sticker is found at the bottom of the camera. Camera Time: The system time of the device. Click Basic Settings and go to Camera Time panel and adjust the time. System Firmware Version: Display the System Firmware version of your camera. Application Firmware Version: Display the application firmware version of your camera. Plug-In Version: Display the plug-in version of your camera. 4.2.2 Device Status On this page you can see device status such as Alarm status, NTP/DDNS status, WIFI status and so on. Figure 4.3 4.2.3 Session status Session status will display who and which IP is visiting the camera now. Figure 4.4 4.2.4 Log The log record shows who and which IP address accessed or logout the camera and when. Foscam Digital Technologies LLC 25 Telephone: 1-800-930-0949
![](/manual_guide/products/foscam-fi9803p-user-manual-f053a2e/26.png)