Foscam FI9803P USER MANUAL - Page 7
Hardware Installation, Bottom View - reset
View all Foscam FI9803P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
www.foscam.us 10/100M adaptive Ethernet interface. Through this interface, IPCAM can be connected with various network devices, such as hub, router, etc. 2 Power Interface Connect the external power adapter, request for 12V/1A power. 3 Reset button Press and hold on the reset button for 5 seconds. Releasing the reset button, the password will back to the factory default administrator password. The default administrator user is admin with no password. 4 Audio output interface: The jack is used to plug external output device such as loud speaker directly. Here microphone cannot directly insert to the interface, it must connect to adapter first. 5 Audio input interface: The jack is used to plug external input device such as sound pick up device directly. Here microphone cannot directly insert to the interface, it must connect to adapter first. Bottom View There are up to two labels located at the bottom of the camera; this is an important feature of original Foscam cameras. If your camera does not have labels , it may be a clone. Cloned Foscam cameras can not use original firmware and are not eligible for warranty or technical services. 1.5 Hardware Installation Step 1: Screw the mount on the wall with the 3 screws provided. Step2: Install the camera on the mounting bracket with 1 screw to complete installation. Please Note: The tail line's wall hole must be lower than socket, ensure that the rain will not wet out device through tail line. Foscam Digital Technologies LLC 6 Telephone: 1-800-930-0949