Home » Foscam Manuals » Video Cameras » Foscam FI9828P » Manual Viewer

Foscam FI9828P USER MANUAL - Page 50

Step 2, Step 3

Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

www.foscam.us Select which camera you'd like to change the port for, and right click Figure 4.35 Modify the Http Port. Enter the Username and password, click OK. Figure 4.36 Step 2: Enter the username and password of the Administrator (default username is admin with a blank password), and click "OK" to apply changes. Step 3: Wait around 10 seconds, you'll see that the camera's LAN IP address has changed. In our example it was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN IP address is now fixed at a static IP address of http://192.168.8.102:2000. This IP address will not change even if the camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that a static LAN IP address is set, or you may have problems later with remote access and seeing the camera remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static LAN IP address! Foscam Digital Technologies Telephone: 1-800-930-0949 28 28

Section	Page
SecurityWarning	3
1Overview	3
1.1KeyFeatures	4
1.2ReadBeforeUse	4
1.3PackageContents	4
1.4PhysicalDescription	4
2AccesstheIPCamera	8
2.1AccesstheCamerainLAN	8
2.2AccesstheCamerainWAN	9
2.2.1StaticIPAddresses	9
2.2.2DynamicIPAddresses	10
2.3UsingtheVLCplayer	14
2.4IPcameraconnectiontotheserver	16
3SurveillanceSoftwareGUI	16
3.1LoginWindow	17
3.2SetupWizard	18
3.3SurveillanceWindow	20
4AdvancedCameraSettings	28
4.1Status	28
4.1.1DeviceInformation	29
4.1.2DeviceStatus	29
4.1.3SessionStatus	30
4.1.4Log	30
4.2BasicSettings	31
4.2.1CameraName	31
4.2.2CameraTime	31
4.2.3UserAccounts	32
4.2.4Multi-Camera	34
4.3Network	40
4.3.1IPConfiguration	40
4.3.2WirelessSettings	42
4.3.3PPPoE	43
4.3.4DDNS	44
4.3.5UPnP	48
4.3.6Port	49
4.3.7MailSettings	54
4.3.8FTPSettings	56
4.3.9P2P	58
4.4Video	58
4.4.1VideoSettings	58
4.4.2OnScreenDisplay	59
4.4.3PrivacyZone	60
4.4.4SnapshotSettings	62
4.4.5IRLEDSchedule	62
4.5Alarm	63
4.5.1MotionDetection	63
4.5.2IOAlarm	66
4.6Record	70
4.6.1StorageLocation	70
4.6.2LocalAlarmLocation	70
4.6.3RecordSchedule	70
4.7PTZ	71
4.7.1Pan/TiltSpeed	71
4.7.2CruiseSettings	72
4.7.3Start-UpOptions	75
4.8Firewall	76
4.9System	77
4.9.1Back-up&Restore	77
4.9.2SystemUpgrade	77
4.9.3FactoryReset	80
4.9.4Reboot	80
5PhoneAPPs	81
6Appendix	81
6.1FrequentlyAskedQuestions	81
6.1.1Installtheadd-onofFirefoxbrowser,Googl	81
6.1.2Uninstalltheadd-onofFirefoxbrowser,Goo	85
6.1.3Ihaveforgottentheadministratorpassword	86
6.1.4Cameracannotrecord	86
6.1.5Subnetdoesn’tmatch	87
6.1.6NoPicturesProblems	87
6.1.7Can’taccessIPcameraininternet	88
6.1.8UPnPalwaysfailed	88
6.1.9Cameracannotconnectwireless	88
6.1.10Can’tseeothercameraslistedinmulti-dev	88
6.2DefaultParameters	89
6.3Specifications	89
6.4CE&FCC	90

Match case Limit results 1 per page

Foscam Digital Technologies

Telephone: 1-800-930-0949

www

.foscam.

Figure 4.35

Figure 4.36

Step 2:

Enter the username and password of the Administrator (default username is admin with a blank

password), and click “OK” to apply changes.

Step 3:

Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it

was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN IP address is

now fixed at a static IP address of http://192.168.8.102:2000. This IP address will not change even if the

camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that

a static LAN IP address is set, or you may have problems later with remote access and seeing the camera

remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static

LAN IP address!

Select

which

camera

you’d like to change the

port for, and right click

Modify the Http Port.

Enter the Username and

password, click OK.