Foxconn A6GMV English Manual. - Page 34

Advanced Chipset Features

Page 34 highlights

Advanced Chipset Features CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Advanced Chipset Features ► Memory Configuration [Press Enter] Help Item ► DRAM Timing Configuration [Press Enter] CAS Latency(Tcl) :N/A, 6 CLK RAS/CAS Delay (Trcd) :N/A, 6 CLK Row Precharge Time(Trp) :N/A, 6 CLK Min Active RAS (Tras) :N/A, 15 CLK RAS/RAS Delay (Trrd) :N/A, 4 CLK Row Cycle(Trc) :N/A, 21 CLK Internal Graphics Configuration Internal Graphics Mode Surround View Primary Video Controller [UMA] [Disabled] [PCIE/IGFX/PCI] 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Memory Configuration/DRAM Timing Configuration Press to go to its submenu. ► CAS Latency(Tcl) This item shows the CAS latency. The CAS Latency is the number of clock cycles that elapse from the time the request for data is sent to the actual memory location until the data is transmitted from the module. ► RAS/CAS Delay(Trcd) This item displays a delay time (in clock cycles) between the CAS and RAS strobe signals. ► Row Precharge Time(Trp) This item shows the number of clock cycles taken between issuing of the precharge command and the active command. The DRAM row precharge time is in unit of clock cycle. ► Min Active RAS(Tras) Displays the number of clock cycles taken between a bank active command and issuing of the precharge command. ► RAS/RAS Delay(Trrd) This item displays a delay time (in clock cycles) between the RAS and RAS strobe signals. ► Row Cycle(Trc) This item shows the minimum timing interval between successive active commands to the same bank. The row cycle time is in unit of clock cycle. ► Internal Graphics Mode Enable/Disable the integrated UMA graphics controller. ► Surround View SurroundView is the ATI technology that provides multi-graphics controller display capability for both the ATI PCIe-based graphics card and the ATI integrated graphics processor (IGP). Enabling SurroundView does not impact display modes (resolution and color depth) or performance. The display mode of each output is controlled independently by the graphics controller connected to it. 1. When using a non-ATI PCI Express (PCIe) graphics card, SurroundView is not supported. The integrated graphics processor (IGP) is automatically disabled, and the system memory 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

3
27
Advanced Chipset Features
► Memory Configuration/DRAM Timing Configuration
Press <Enter> to go to its submenu.
► CAS Latency(Tcl)
This item shows the CAS latency. The CAS Latency is the number of clock cycles that elapse
from the time the request for data is sent to the actual memory location until the data is
transmitted from the module.
► RAS/CAS Delay(Trcd)
This item displays a delay time (in clock cycles) between the CAS and RAS strobe signals.
► Row Precharge Time(Trp)
This item shows the number of clock cycles taken between issuing of the precharge command
and the active command. The DRAM row precharge time is in unit of clock cycle.
► Min Active RAS(Tras)
Displays the number of clock cycles taken between a bank active command and issuing of the
precharge command.
► RAS/RAS Delay(Trrd)
This item displays a delay time (in clock cycles) between the RAS and RAS strobe signals.
► Row Cycle(Trc)
This item shows the minimum timing interval between successive active commands to the
same bank. The row cycle time is in unit of clock cycle.
► Internal Graphics Mode
Enable/Disable the integrated UMA graphics controller.
► Surround View
SurroundView is the ATI technology that provides multi-graphics controller display capability
for both the ATI PCIe-based graphics card and the ATI integrated graphics processor (IGP).
Enabling SurroundView does not impact display modes (resolution and color depth) or
performance. The display mode of each output is controlled independently by the graphics
controller connected to it.
1. When using a non-ATI PCI Express (PCIe) graphics card, SurroundView is not supported.
The integrated graphics processor (IGP) is automatically disabled, and the system memory
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Features
► Memory Configuration
Help Item
► DRAM Timing Configuration
[Press Enter]
CAS Latency(Tcl)
:N/A, 6 CLK
RAS/CAS Delay (Trcd)
:N/A, 6 CLK
Row Precharge Time(Trp)
:N/A, 6 CLK
Min Active RAS (Tras)
:N/A, 15 CLK
RAS/RAS Delay (Trrd)
:N/A, 4 CLK
Row Cycle(Trc)
:N/A, 21 CLK
Internal Graphics Configuration
Internal Graphics Mode
[UMA]
Surround View
[Disabled]
Primary Video Controller
[PCIE/IGFX/PCI]
↑↓←→:Move
Enter:Select
+/-/:Value
F10:Save
ESC:Exit
F1:General Help
F9:Optimized Defaults
[Press Enter]