Foxconn Cinema Premium English Manual. - Page 42
► CPU VCore/DRAM Voltage/+ 3.3V/+12.0V/NT/SB Voltage/VBAT
View all Foxconn Cinema Premium manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3 Hardware Monitor CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Hardware Monitor Case Intrustion Alert [Disabled] Help Item Hardware Monitor [Enabled] CPU Temperature :45 oC/113 oF Enables a warning System Temperature :40 oC/104 oF message once the case North Bridge Temperature :45 oC/113 oF intrusion alert has CPU Fan Speed :2136 RPM been triggered System Fan Speed :N/A CPU VCore Voltage :1.200V DRAM Voltage :1.920V +3.30V :3.360V +12.0V :11.840V HT/SB Voltage :1.200V VBAT :3.104V Smart Power LED [Disabled] CPU Smart Fan Control [Automatic mode] Fan off Temperature (oC) [000] Fan on Temperature (oC) [035] Fan on Startup speed (Z) [064] Fan slope (Z) [2] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F2/F3:Change Colors F9:Optimized Defaults ► Case Intrustion Alert This item is used to enable or disable a warning message once the case intrusion alert has been triggered. ► Hardware Monitor This item is used to enable or disable Hardware Health Monitoring Device. ► CPU/System/NB Temperature The CPU/System/NB temperature are automatically detected and displayed by the system. ► CPU Fan/System Fan Speed The CPU fan/System fan speed are automatically detected and displayed by the system. ► CPU VCore/DRAM Voltage/+ 3.3V/+12.0V/NT/SB Voltage/VBAT The current voltages are automatically detected and displayed by the system. ► Smart Power LED Smart Power LED is a feature built on your motherboard to indicate different states during Power On Self Test (POST). The LED is located at the front panel, and it displays POST state by different long-short blinking intervals. You can always leave this state enabled. System Status Normal No Memory No Display Post Error Message No CPU Fan Power LED Status Always On Continue blinking On (1sec.), Off (1sec.) Continue blinking On (2sec.), Off (2sec.) Continue blinking On (1/2sec.), Off (1/2sec.) Continue blinking On (1/2sec.), Off (1/2sec.) Stop Blinking Condition Always On Reboot & Memory OK Reboot & Display OK Enter Setup or Skip Reboot & Fan OK ► CPU Smart Fan Function / System Smart Fan Function [Full On Mode]; [Automatic Mode]. This option is used to enable or disable smart fan function. 35