Foxconn G31MV-K English Manual. - Page 32

Smart BIOS Phoenix - AwardBIOS CMOS Setup Utility Smart BIOS Smart Boot Menu [Disabled] Item Help Smart Power LED [Enabled] Current CPU Speed 1866MHz Menu Level ► Current FSB Speed 1066MHz Current CPU Multiplier 7 Smart Boot menu with a Current DRAM Speed 800MHz timer to let user to control boot device easily 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► Smart Boot Menu When PC starts, if [Enabled] is selected, a Boot Menu will be automatically displayed to inform you to select a boot device. If no device is selected, the first device will be used. If [Disabled] is selected, then PC will ask you to press [Esc] key to get into Boot Menu. This setting simplifies multiple boot devices user from pressing [Esc] key to enter boot menu. ► Smart Power LED Smart Power LED is a feature built on your motherboard to indicate different states during Power On System Test (POST). The LED is located at the front panel, and it displays POST state by different long-short blinking intervals. You can always leave this state enabled. System Status Power LED Status Stop Blinking Condition Normal Always On Always On No Memory Continue blinking On (1sec.), Off (1sec.) Reboot & Memory OK No Display Continue blinking On (2sec.), Off (2sec.) Reboot & Display OK Post Error Message Quick blinking twice (1/3sec. On, 1/3sec. Off), one long On (1sec.), continuously. Enter Setup or Skip No CPU Fan Continue blinking On (1/2sec.), Off (1/2sec.) Reboot & Fan OK ► Current CPU Speed This item displays the current CPU speed. ► Current FSB Speed This item displays the current Front Side Bus speed. ► Current CPU Multiplier This item displays the current CPU Ratio. ► Current DRAM Speed This item displays the current DRAM speed. 25