Foxconn G31MV-K English Manual. - Page 42
► OnChip IDE Devices / OnBoard Devices / SuperIO Devices / USB Devices Setting, ► IDE HDD Block Mode
View all Foxconn G31MV-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Integrated Peripherals Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals ► OnChip IDE Devices ► OnBoard Devices ► SuperIO Devices ► USB Devices Setting [Press Enter] Item Help [Press Enter] [Press Enter] Menu Level ► [Press Enter] 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► OnChip IDE Devices / OnBoard Devices / SuperIO Devices / USB Devices Setting Press to go to relative submenu. OnChip IDE Devices Phoenix - AwardBIOS CMOS Setup Utility OnChip IDE Devices IDE HDD Block Mode [Enabled] Item Help IDE DMA Transfer Access [Enabled] On-Chip Primary PCI IDE [Enabled] Menu Level ► IDE Primary Master PIO [Auto] If your IDE hard drive IDE Primary Slave PIO [Auto] supports block mode IDE Primary Master UDMA [Auto] select Enabled for IDE Primary Slave UDMA [Auto] automatic detection of ** On-Chip Serial ATA Setting ** the optimal number of SATA Controller [Enhanced Mode] block read/writes per SATA Port Speed Settings [Disabled] sector the drive can support. Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► IDE HDD Block Mode If your IDE hard drive supports block mode, select [Enabled] for automatic detection of the optimal number of block read/write per sector. ► IDE DMA Transfer Access [Disabled] : to disable DMA transfers for all IDE drives. They will revert to PIO mode transfers. [Enabled] : to enable DMA transfers for all IDE drives. The proper DMA mode will be detected at boot-up. If the drive does not support DMA transfers, then it will use PIO mode instead. Recommend leaving this BIOS feature at the default [Enabled] setting. You should only disable 35