Foxconn G31MV-K English Manual. - Page 50

3 PC Health Status Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Case Open Warning [Disabled] Item Help Shutdown Temperature [Disabled] Warning Temperature [Disabled] Menu Level ► CPU Vcore 1.37 V +3.3V 3.34 V +5V 4.99 V +12V 12.09 V VDDR CPU Temperature System Temperature 1.77V 29oC 30oC CPU Fan Speed 2039 RPM System Fan Speed 0 RPM Smart Fan Control [Disabled] x PWM Start Temperature 35 x Start PWM Value 64 x Slope PWM Value 2 x Delta Temperture 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► Case Open Warning This item is used to enable or disable case open warning function. ► Shutdown Temperature This item is used to set the system temperature upper limit. When the temperature exceeds the set value, the system will shut down automatically. ► Warning Temperature This option is used to set the warning temperature for the system. When the temperature of CPU is higher than the set value, the motherboard will send out warning information. ► CPU Vcore/+ 3.3V/+5V/+12V/VDDR The current voltages are automatically detected and displayed by the system. ► CPU/System Temperature The CPU/System temperature are automatically detected and displayed by the system. ► CPU Fan/System Fan Speed The CPU fan/System fan speed are automatically detected and displayed by the system. ► Smart Fan Control This option is used to enable or disable smart fan function. Only when this option is enabled, you can set some correlative parameters. ► PWM Start Temperature It allows you set a temperature value from which smart fan starts its operation. ► Start PWM Value It allows you to set an initial PWM value to drive the fan when the temperature reaches Start value and smart fan begins its operation. The higher PWM value can achieve the faster fan speed. ► Slope PWM Value It controls the PWM value being stepped up or down versus temperature changes. 43