Foxconn G31MXP-K English Manual. - Page 48

Power Management Setup Phoenix - AwardBIOS CMOS Setup Utility Power Management Setup ACPI Function ACPI Suspend Type Power Button ��P�W��R�O��N�a�f�te�r�P�W��R�-�F�a�il PCI Express PME Wake Up by PCI Card ��W��a�k�e�U�p��o�n�L�A�N� Resume by Alarm Date of Month Alarm Time(hh:mm:ss) Alarm [Enabled] Item Help [S3(STR)] [Instant-off] Menu Level ► [Off] [Enabled] [Enabled] [Enabled] [Disabled] 0 0 : 0: 0 ** Power Management Relativ... HPET Support [Enabled] HPET Mode [32-bit mode] USB Wake Up from S3 [Disabled] Power On by Mouse [Disabled] Power On by Keyboard [Disabled] KB Power On Password Enter Hot Key Power On Ctrl-F1 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults 3 ACPI (Advanced Configuration and Power Interface) is an open industry standard that defines power and configuration management interfaces between an operating system and the BIOS. In other words, it is a standard that describes how computer components work together to manage system hardware. In order to use this function the ACPI specification must be supported by the OS (for example, Windows2000 or WindowsXP). ACPI defines five sleeping states, they are : S1 - The S1 sleeping state is a low wake latency sleeping state. In this state, no system context is lost (CPU or chip set) and hardware maintains all system context. (also called Power On Suspend) S2 - The S2 sleeping state is a low wake latency sleeping state. This state is similar to the S1 sleeping state except that the CPU and system cache context is lost (the OS is responsible for maintaining the caches and CPU context). Control starts from the processor's reset vector after the wake event. S3 - The S3 sleeping state is a low wake latency sleeping state where all system context is lost except system memory. CPU, cache, and chip set context are lost in this state. Hardware maintains memory context and restores some CPU and L2 configuration context. Control starts from the processor's reset vector after the wake event. (also called Suspend to RAM) S4 - The S4 sleeping state is the lowest power, longest wake latency sleeping state supported by ACPI. In order to reduce power to a minimum, it is assumed that the hardware platform has powered off all devices. Platform context is maintained. (also called Suspend to Disk) S5 - The S5 state is similar to the S4 state except that the OS does not save any context. The system is in the "soft" off state and requires a complete boot when it wakes. Software uses a different state value to distinguish between the S5 state and the S4 state to allow for initial boot operations within the BIOS to distinguish whether or not the boot is going to wake from a saved memory image. 41