Foxconn Q57M English Manual. - Page 33

3 CAUTION ► Hyper Threading This item is used to enable/disable the Hyper Threading Technology feature. ► Active Processor Cores This item is used to set the number of cores to enable in each processor package. ► A20M Legacy OSes and APs may need A20M enabled. ► EIST You can select the EIST (Processor Power Management, PPM) through this item. ! Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically adjust processor voltage and core frequency, which can result in decreased average power consumption and decreased average heat production. There are some system requirements must be met, including CPU, chipset, motherboard, BIOS and operation system. Please refer to Intel Website for more information. ► Intel(R) C-STATE Technology This item is used to enable/disable C-State. C-State means CPU idle is set to C2/C3/C4. IDE Configuration CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. IDE Configuration Configure SATA as [IDE] Help Item SATA #1 Configuration [Enhanced] SATA #2 Configuration [Enhanced] Options IDE Detect Time Out [35] IDE RAID AHCI Disabled Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults ► Configure SATA as This item is used to set the operation mode of your SATA ports 1, 2, 3, 4, 5, 6. Set to [IDE] can configure the SATA ports to support IDE mode. ► SATA#1 IDE Configuration SATA#1 are the SATA ports 1, 2, 3, 4 of the motherboard. This item allows you select the mode of the SATA ports. Setting values are: [Compatible], [Enhanced]. ► SATA#2 IDE Configuration 26