Frigidaire ALLFRZKIT Installation Instructions - Page 3
Installing Trim & Grille Assembly Into Cabinetry
![]() |
UPC - 012505223594
View all Frigidaire ALLFRZKIT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
4. Attach brackets (H) to the angled end of each side trim (B and C). Gently secure brackets to side trim by tightening set screws (I), only until snug to avoid dimpling the extrusion face. See Figure 4. DO NOT OVERTIGHTEN. 5. Join each side trim (B and C) to the top trim (A). Make sure the ends of the Grille Assembly are captured in the channel of each side trim, then tape in place. Gently secure brackets (H) to top trim (A) by tightening set screws (I), only until snug to avoid dimpling the trim face. See Figure 5. DO NOT OVERTIGHTEN. H IB Installing Trim & Grille Assembly Into Cabinetry 1. First, place protective covering where side trim will contact the floor near rough opening. Then, stand up the grille and frame assembly and center in rough opening. See Figure 6. You may need to use several pieces of tape at the top corners and top center to temporarily hold the assembly in place. 3
![](/manual_guide/products/frigidaire-allfrzkit-installation-instructions-9290118/3.png)