Frigidaire FAQ055S7A Installation Instructions - Page 1

INSTALLATION INSTRUCTIONS Tools and ik Gather the required tools and parts before starting Installation. Read and follow the instructions provided with any tools listed here. Tools Needed • Flat-blade and Phillips screwdrivers • Level • Tape measure • Drill and 3132' or smaller bit Through-the-Wall Installation: In addition to the tools listed above, the following tools are needed for through-the-wall Installation. • Saw • Wood preservative • Caulk • 1' (2.5 cm) or thicker lumber ■ #10 x 1' wood screws (7) Parts Supplied (on some models) Check that all parts are included in parts package. Location Requirem IMPORTANT: Observe all governing codes and ordinances. Check the location where air conditioner will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation. The location should provide: • Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner. NOTE: Do not use an extension cord. • Free movement of air fn room to be cooled. • A large enough opening for the air conditioner. • Adequate wall support for weight of air conditioner Air conditioner weighs between 50 and 60 lbs (22 to 28 kg). NOTE: Cabinet louvers must not be obstructed. Air must be able to pass freely through the cabinet louvers. A 0 IT H CDEF 11 r`r44! • 11 A. Cabinet louvers A. Foam window sash seal B. Window lock brackets (I) C. /10x W pan-head Phillips screws (6) D. 110x W pan-head Phillips screws (3) E. 110x W round-head screws (5) F.110 x lha pan-head Phillips screws (2) G. Top channel H. Side curtains (2) L Foam seal NOTE: Installation parts are supplied for double-hung windows up to 40' (101.6 cm) wide. A special Wide Window Kit is available from your dealer or service center. See 'Accessories.' P/N 66129901290 1