Frigidaire FAQ055S7A Installation Instructions - Page 3
Unpacking
View all Frigidaire FAQ055S7A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
INSTALLATION INSTRUCTIONS Unpacking Excessive Weight Hazard Use two or more people to move and install air conditioner. Failure to do so can result in back or other injury. 4. Remove the window lock bracket and screw from the air conditioner and set aside.(on some models) Remove packaging materials ■ Remove and dispose of/recycle packaging materials. Remove tape and glue residue from surfaces before turning on the airconditioner. Rub a small amountof liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry. ■ Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your air conditioner. ■ Handle the air conditioner gently. 1. Remove the air conditioner from the carton and place it on cardboard. 2. Remove shipping screws from both sides of the cabinet A d B A. Window loci bracket screw B. Window lock bracket 5. Remove the ground screw and ground wire from the front of the air conditioner base.Save the ground screw. t A A. Shipping screw 3. Remove front panel by removing 2 phillips screws one from either side of front 3A: Remove 3 screws of control panel from front panel. A • • A. Green ground wire B. Ground screw 6. Pull on the handles to slide the air conditioner out of the cabinet Place the air conditioner on cardboard. !FT A. Handles NOTE: Do not Ilft, push, pull or remove any expanded polystyrene (foam) from inside the air conditioner. It is not packing material. 3