Frigidaire FAQ055S7A Installation Instructions - Page 7
Complete, Installation
View all Frigidaire FAQ055S7A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
• Use I. (2.5 cm) or thicker lumber for wood frame. 4 2. Use a level to check thatcabinet is level side to side. IlllIIlly A. Outside width B. Outside height C. Depth 4. Apply the wood preservative to the outside exposed surface. 5. Insert the frame in the wall opening. Square and level frame. 6. Attach frame securely to the wall, Install Cabinet into Wood Frame 1. Insert cabinet into the framed wall opening.The top of the cabinet should extend 3/4 (19.1 mm) into the room.lf there is trim,the cabinet should extend 3/ 4 (19.1 mm) past the trim. B A A. Level 3. Check thatairconditionercabinet is tilted to the outside so thatwater will run to the outside.The cabinet should slope at least half -a -bubble towards the rear. 4. Reuse the insulation to seal opening between cabinet and frame. 5. Use existing holes in sides and top of cabinet and 7 - #10 x 1' wood screws (not provided ) to attach cabinet to frame. NOTE: Do not overtighten screws or the cabinet will distort and provide a poor air seal between cabinetand air conditioner. 6. Caulk all outside wall openings around cabinet A. 3/4 (19.1 mm) extending into room B. Trim Complete Installation NOTE: Handle the air conditioner gently. 2. Insert air conditioner into cabinet. 1. Make sure the free end of the ground wire is outside of the cabinet Excessive Weight Hazard Use two or more people to move and Install air conditioner. Failure to do so can result in back or other Injury. A A. Make sure the free end of the ground wire is outside of the cabinet. 7