Frigidaire FAS255P2A Use and Care Manual - Page 10
Additional Things You Should Know
View all Frigidaire FAS255P2A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Fan Faster Fan Faster Fan Faster Air Conditioner Features (continued) TO TURN UNIT OFF: Temp /Timer Fan Slower AUTO Auto Cool Clean Air Heat Fan Energy Saver Cool Mode Temp /Timer Timer Sleep Check Filter Remote Sensing On/Off YOU WILL SEE: Temp /Timer Fan Slower AUTO Auto Cool Clean Air Heat Fan Energy Saver Cool Mode Temp /Timer Timer Sleep Check Filter Remote Sensing On/Off DO THIS: PRESS ON/ OFF BUTTON ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with. The " Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time. The control will maintain the set temperature within 2 F, between 60 F and 90 F degrees. The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other and back, press and hold the " TEMP/TIMER" Up ( ) and Down ( ) buttons together for 3 seconds. Fresh Air Vent Control Fresh Air Vent Control The Fresh Air Vent allows the air conditioner to: 1.Recirculate inside air - Vent Closed (See Fig.1) 2.Draw fresh air into the room - Vent Open(See Fig.2) 3.Exchange air from the room and draws fresh air into the room - Vent and Exhaust Open (See Fig.3) Figure 1 (VENT CLOSED) Figure 2 (VENT OPEN) Figure 3 (VENT & EXHAUST OPEN) 4-Way Louvers AUTO Auto Cool Clean Air Heat Fan Saver Cool Mode Fan Slower Temp /Timer Temp /Timer Timer Sleep Check Filter Remote Sensing On/Off Air directional louvers control air flow direction. You air conditioner has the louver type described below. Auger Type The louvers will allow you to direct the air flow Up or Down and Left or Right throughout the room as needed. Rotate the Auger Wheel until the desired Left/Right direction is obtained. Pivot horizontal louvers until the desired Up/Down direction is obtained. 10