Frigidaire FAS255P2A Use and Care Manual - Page 8

Air Conditioner Features (continued) TIMER: DELAY STOP/START FEATURE: Temp /Timer Fan Slower Fan Faster AUTO Auto Cool Clean Air Heat Fan Energy Saver Cool Mode Temp /Timer Timer Sleep Check Filter Remote Sensing On/Off YOU WILL SEE: Temp /Timer Fan Slower AUTO Auto Cool Clean Air Heat Fan Energy Saver Cool Mode Temp /Timer Timer Fan Faster Sleep Check Filter Remote Sensing On/Off LIGHT ON THEN DO THIS: DO THIS: PRESS UP ( ) OR PRESS TIMER DOWN ( ) BUTTON BUTTON SLEEP FEATURE: Temp /Timer Fan Slower Fan Faster AUTO Auto Cool Clean Air Heat Fan Energy Saver Cool Mode Temp /Timer Timer Sleep Check Filter Remote Sensing On/Off NOTE: For Delay Stop, the unit must be in the ON position. NOTE: For Delay Start, the unit must be in the OFF position. To adjust timer setting, tap or hold the UP arrow ( ) or the DOWN arrow ( ) to change delay timer at .5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours. The control will count down the time remaining until start (8, 7.5, 7,etc.). The Delay Start mode automatically selects cooling at High Fan Speed. The temperature maintained will be the same as previously set. To change the set temperature, press "COOL " then Up or Down arrows until the desired temperature is indicated on the display. After 5 seconds, the control will automatically change the display back to the hours remaining until the unit will start/stop. Turning the unit "ON" or "OFF" at any time will cancel the Delay Start/Stop function. YOU WILL SEE: Temp /Timer Fan Slower Fan Faster AUTO Auto Cool Clean Air Heat Fan Energy Saver Cool Mode Temp /Timer Timer Sleep Check Filter Remote Sensing On/Off LIGHT ON DO THIS: PRESS SLEEP BUTTON CHECK FILTER FEATURE: Temp /Timer Fan Slower Fan Faster AUTO Auto Cool Clean Air Heat Fan Energy Saver Cool Mode Temp /Timer Timer Sleep Check Filter Remote Sensing On/Off NOTE: In this " MODE " the selected temperature will increase by 2 F 30 minutes after the mode is selected. The temperature will then increase by another 2 F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the " Sleep " MODE and the unit will continue to operate as originally programmed. The " Sleep" MODE program can be cancelled at any time during operation by again pressing the " Sleep" button. YOU WILL SEE: Temp /Timer Fan Slower Fan Faster AUTO Auto Cool Clean Air Sleep Check Filter Heat Fan Energy Saver Cool Temp /Timer Timer Remote Sensing Mode On/Off LIGHT ON NOTE: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Check Filter " button and the light will go off. 8