Frigidaire FAS255P2A Use and Care Manual - Page 5

Operation of Current Device ! WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord do the following: 1. Plug in the Air Conditioner. 2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will notice a click as the RESET button pops out. 3. Press the RESET button. Again you will notice a click as the button engages. 4. The power supply cord is now supplying electricity to the unit. (On some products this is also indicated by a light on the plug head). NOTES: Do not use this device to turn the unit on or off. Always make sure the RESET button is pushed in for correct operation. The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or it cannot be reset. A new one can be obtained from the product manufacturer. If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one obtained from the product manufacturer. Air Conditioner Features Control panel AUTO COOL CLEAN AIR FEATURE FEATURE (SOME MODELS) ELECTRONIC CONTROL OPERATING INSTRUCTIONS Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the control panel alone or with the remote. SETS FAN SLEEP CHECK FILTER SPEEDS MODE RESET BUTTON Remote with digital display & remote sensing feature TURNS UNIT ON OR OFF LIGHT Temp /Timer AUTO Auto Cool Clean Air Heat Fan Energy Saver Cool Fan Slower Temp /Timer Timer Fan Faster Sleep Check Filter Remote Sensing ADJUSTS TEMPERATURE OR TIME REMOTE TEMP. SENSING INDICATOR (SOME MODELS) SETS MODE Mode On/Off SETS ADJUSTS ACTIVATES TURNS UNIT MODE TEMPERATURE TIMER ON OR OFF OR TIME Remote for HEAT models TURNS UNIT ON OR OFF LIGHT ACTIVATES REMOTE THERMOSTAT (some models) Standard remote TURNS UNIT ON OR OFF SETS FAN SPEEDS ACTIVATES TIMER LIGHT ADJUSTS TEMPERATURE OR TIME SETS FAN SPEEDS ADJUSTS TEMPERATURE OR TIME SETS FAN SPEEDS SETS MODE HEAT MODE SETS ACTIVATES MODE TIMER Heat ACTIVATES TIMER Battery Size: AA WARNING: Do Not Mix Old And New Batteries. Do Not Mix Alkaline, Standard (Carbon-Zinc), Or Rechargeable (Nickel-Cadmium) Batteries. 5