Frigidaire FF03DISPC1 Complete Owners Guide - Page 5

5 INSTALLATION (CONTINUED) A. The Cushion Ring and the Lower Mount Ring will remain attached to the disposer during installation. Take apart the other parts of the mounting assembly by rotating the Lower Mount Ring clockwise until the Lower Mount Ring Tabs slide off from the Upper Mount Ring ramp (see A1). This allows you to pull the Sink Flange up and out of the remaining Lower Mount Assembly. Note the order of these parts as they are arranged in the required order. Unscrew the 3 Mount Screws until the Upper Mount Ring can be moved to the top of the Support Flange. Remove the Retainer Ring with a flat head screw driver (see A2). C. Be sure the sink is clean. Load the underside rim of the sink flange with plumber's putty (see C1). From top of the sink, push the sink flange down against the sink opening to make a good seal (see C2). DO NOT MOVE OR ROTATE the sink flange once it has been seated or the seal may be broken. B. Keep the remaining parts placed together in the order they were removed (see B1). Before you connect the disposer to the mount assembly under the sink, make sure the Lower Mount Ring is in place and the black Cushion Ring is still engaged properly to the top of the disposer hopper (see B2). D. Place a heavy object, such as the disposer (use a towel to prevent sink scratching) on top of the Sink Flange to hold it down.