Frigidaire FFET2725PS Use and Care Manual - Page 16

OVEN CONTROLS Setting Self Clean Cycle Duration The clean key controls the self cleaning feature. If you are planning to use the oven directly after a self clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. A 3 hour self clean cycle will actually take about 4 hours to complete. To set the controls for a 3 hour Self Cleaning cycle to start immediately and shut off automatically 1. Be sure that the clock is set with the correct time of day and the oven door is closed. 2. Press clean. 3:00, CLn will appear, UPPER and CLEAN will flash in the display. The control will automatically clean for a 3 hour period. 3. Press start. DOOR and LOCKED will flash; UPPER and CLn will appear in the display and the clock will return to the time of day. 4. As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the UPPER, DOOR and LOCKED indicator light will stop flashing and remain on. Also, the oven icon will appear in the display. Allow about 15 seconds for the oven door lock to close. 5. Press start time. UPPER and DELAY will start flashing and - - - - will appear in the display. Note: If the optional delay self clean is desired, finish steps 6-8. 1. Press the up or down arrow until the desired start time appears in the display. 2. Press start or wait 5 seconds. The display will return to the time of day. 3. The control will start the self cleaning at the set start time, for the period of time previously selected. When the Self Clean Cycle is Completed 1. Three long beeps will be heard and CLn will disappear from the display. UPPER, DOOR and LOCKED will remain in the display until the door is unlocked. Some models will display Hot. The cooling fan will continue to run until the oven has cooled down. 2. Once the oven has cooled down for 1 hour, and UPPER, DOOR and LOCKED are no longer displayed, the oven door can then be opened. Stopping or interrupting a Self Clean Cycle If it becomes necessary to stop or interrupt a self cleaning cycle due to excessive smoke or fire in the oven: Press clear off. Once the oven has cooled down for approximately 1 hour and UPPER, DOOR and LOCKED are no longer displayed, the oven door can then be opened. Important Notes when using the self clean feature: • A self clean cycle cannot be started if the Oven Lockout feature is active. • When self clean cycle is active on one oven, the other one cannot be used or set for a self clean cycle or any cooking cycle. • If your clock is set for normal 12 hour display mode the delay self clean can never be set to start more than 12 hours in advance. To set for a delayed self cleaning cycle 12-24 hours in advance see instructions to set control for the 24 hour time of day display mode. 16