Frigidaire FFET2725PS Use and Care Manual - Page 19

Replacing the oven light

Page 19 highlights

Replacing the oven light CAUTION Be sure the oven is unplugged and all parts are cool before replacing oven light. If the oven is hard wired into a junction box, make sure the breaker that powers the oven is turned off. The interior oven lights are located at the rear of the oven cavity and are covered with a glass shield. The glass shield must be in place whenever the oven is in use (See Figure 10). Replacing the oven interior light bulb: 1. Turn electrical power off at the main source. 2. Remove interior oven light shield by turning a quarter turn. 3. Replace bulb with a new T-4 type Halogen 25 watt appliance bulb. NOTE Do not allow your fingers to touch the new bulb when replacing. This will shorten the life of the bulb. Use a paper towel or cotton glove while handling the new bulb when installing. 4. Replace glass oven light shield. 5. Turn power back on again at the main source. 6. Be sure to reset the time of day on the clock. CARE AND CLEANING Figure 10: Wall oven Halogen light 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

19
CARE AND CLEANING
Replacing the oven light
The interior oven lights are located at the rear of the oven
cavity and are covered with a glass shield. The glass shield
must be in place whenever the oven is in use (See
Figure 10
).
Replacing the oven interior light bulb:
1.
Turn electrical power off at the main source.
2.
Remove interior oven light shield by turning a quarter
turn.
3.
Replace bulb with a new T-4 type Halogen 25 watt
appliance bulb.
4.
Replace glass oven light shield.
5.
Turn power back on again at the main source.
6.
Be sure to reset the time of day on the clock.
Be sure the oven is unplugged and all parts are cool
before replacing oven light. If the oven is hard wired into a
junction box, make sure the breaker that powers the oven
is turned off.
Do not allow your fingers to touch the new bulb when
replacing. This will shorten the life of the bulb. Use a
paper towel or cotton glove while handling the new bulb
when installing.
Figure 10:
Wall oven Halogen light
CAUTION
NOTE