Frigidaire FGEW2765PW Complete Owner's Guide - Page 9
Setting the Clock, Setting 12 or 24 Hour Time of Day Display, Minimum Temp. /Time
View all Frigidaire FGEW2765PW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OVEN CONTROLS Table 1: Minimum and maximum control settings Feature Preheat Bake Broil Convection Bake Convection Roast Convection Broil Slow Cook Meat Probe Timer Clock Time Delay Start Bake Time Self Clean Time Mode 12 Hr. Mode 24 Hr. Mode 12 Hr. Mode 24 Hr. Mode 12 Hr. Mode 24 Hr. Mode 12 Hr. Mode 24 Hr. Mode Minimum Temp. /Time 170°F (77°C) 170°F (77°C) 400°F (205°C) 170°F (77°C) 170°F (77°C) 400°F (205°C) Lo 225°F (108°C) Lo 140°F (60°C) 0:01 Min. 0:01 Min 1:00 Hr./Min. 0:00 Min 1:00 Hr./Min. 0:00 Min 0:01 Min 0:01 Min 2 hours The features listed show the minimum and maximum time or temperature settings allowable. Maximum Temp. /Time 550°F (288°C) 550°F (288°C) 550°F (288°C) 550°F (288°C) 550°F (288°C) 550°F (288°C) Hi 275°F (135°C) Hi 210°F (99°C) 11:59 Hr./Min. 11:59 Hr./Min. 12:59 Hr./Min. 23:59 Hr./Min. 12:59 Hr./Min. 23:59 Hr./Min 5:59 Hr./Min. 5:59 Hr./Min. 4 hours Setting the Clock The set clock control is used to set the clock. The clock may be set for 12 or 24 hours display operation. The clock is preset at the factory for 12 hour display. When the oven is first plugged in, or when the power supply to the oven has been interrupted, the timer in the display will flash. To set the clock (example below for 1:30): 1. Press set clock. CLO will appear in the display. 2. Press 1 3 0 on the keypad to set the time of day to 1:30. CLO will stay in the display. 3. Press start. CLO will disappear and the clock will start. Setting 12 or 24 Hour Time of Day Display 1. Press and hold set clock for 6 seconds. CLO will appear in the display. 2. Continue holding the key until 12Hr dAY or 24Hr dAY appears in the display and the control beeps once. 3. Press self clean to switch between the 12 and 24 hour time of day display. The display will show either 12Hr dAY or 24Hr dAY. 4. Press start to accept the change or press off to reject the change. 5. Reset the correct time as described in this section. If the 24 hour time of day mode was chosen, the clock will display time from 0:00 through 23:59 hours. 9