Frigidaire FHWC3655LS Complete Owner's Guide (English) - Page 5

Installing the hood 5 IMPORTANT 3 Save installation instructions for electrical inspector's use. The range hood must be connected with copper wire only. The range hood should be connected directly 4 to the fused disconnect (or circuit breaker) box through metal electrical conduit. Wire sizes must conform to the requirements of 5 the National Electrical Code ANSI/NFPA 70 - latest edition", or CSA Standards C22.1-94, Canadian Electrical Code Part 1 and C22.2 No.0-M91 - latest edition** and all local codes and ordinances. 6 A U.L.- or C.S.A.-listed conduit connector must be provided at each end of the power supply conduit (at the range hood and at the junction box). 7 Copies of the standards listed may be obtained from: * National Fire Protection Association Batterymarch 8 Park Quincy, Massachusetts 02269 ** CSA International 8501 East Pleasant Valley Road Cleveland, Ohio 44131-5575 9 Power requirement: 120V~, 60Hz, 15 or 20A branch circuit 10 Intended use 11 • Your range hood is intended for exhaust operation only. This range hood is not recommended to be 12 used over indoor grills. Do not use it to exhaust hazardous or explosive materials or vapors. 13 Parts supplied No. Part Qty. 14 1 Range hood 1 15 Upper bracket 1 Lower bracket 1 Plantilla (estarcido) Collar 1 Recirculation kit (optional accessories) 1 FHWRKT55LS Bulb 20W, 120V~, GU10 (pre- 2 assembled) Long screw (4mm x 32mm) 8 Wall plug 8 Short screw (4mm x 12mm) 4 Wood screw (4mm x 50mm) 4 Stainless steel screw 2 (3.5mm x 10mm) Short screw (3.5mmx8mm) 2 10' extension chimney kit (optional 1 accessories) -FW10EX55LS Assembly template (stencilled) 1 2 Upper and lower chimney 1 + 1 GB