Frigidaire FHWC3660LS Complete Owner's Guide (English) - Page 5

Installing the hood 5 • Do not have a fuse in the neutral or ground circuit. 3 IMPORTANT 4 Save installation instructions for electrical inspector's use. The range hood must be connected with copper 5 wire only. The range hood should be connected directly to the fused disconnect (or circuit breaker) box through metal electrical conduit. 6 Wire sizes must conform to the requirements of the National Electrical Code ANSI/NFPA 70 - latest 7 edition", or CSA Standards C22.1-94, Canadian Electrical Code Part 1 and C22.2 No.0-M91 - latest edition** and all local codes and ordinances. 8 A U.L.- or C.S.A.-listed conduit connector must be provided at each end of the power supply conduit (at the range hood and at the junction box). 9 Copies of the standards listed may be obtained from: 10 * National Fire Protection Association Batterymarch Park Quincy, Massachusetts 02269 ** CSA International 8501 East Pleasant Valley Road 11 Cleveland, Ohio 44131-5575 Power requirement: 12 120V~, 60Hz, 15 or 20A branch circuit Intended use 13 • Your range hood is intended for exhaust operation 14 only. This range hood is not recommended to be used over indoor grills. Do not use it to exhaust hazardous or explosive materials or vapors. 15 Parts supplied No. Part Qty. 16 1 Range hood 1 17 Upper and lower chimney 1 + 1 Upper bracket 1 Lower bracket 1 Template (stencilled) Collar 1 Recirculation kit (optional accessories) 1 -FHWRKT60LS Bulb 20W, 120V~, GU10 2 (pre-assembled) Bolt, rubber 4 washer, washer sets Long screw (4mm x 32mm) 8 Wall plug 8 Short screw (4mm x 12mm) 4 Allen key 1 Wood screw (4mm x 50mm) Short screw 4 (3.5mmx8mm) Short screw (3.5mmx8mm) 2 10' extension chimney kit (optional 1 accessories) -FW10EX60LS Assembly template (stencilled) 1 2 Glass cover 1 GB