Frigidaire FHWC3660LS Complete Owner's Guide (English) - Page 8

Desired range hood distance above a, high cook top

Get Frigidaire FHWC3660LS PDF manuals and user guides View all Frigidaire FHWC3660LS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

8 Installing the hood fig. Ceiling 0.9" Long 9.8" screws 9.3" Wood screws 9.13" 9.8" 7.5" 10" Dimension Wall A (see table) • Insert 2 screws (10 or 14) in the top location, but do not fully insert the screws (fig. ). Mount the range hood (1) to the wall and tighten the screws. Insert and tighten the 2 remaining screws on the bottom location of the range hood (fig. / ). • Attach the collar (6) to the range hood (1). Secure with 2 short screws (12) (fig. ). fig. fig. 0.08" fig. fig. 0.08" Desired range hood distance above a 36" high cook top 26"*3 27"*3 28"*3 29"*3 30"*3 31"*3 32"*3 33" 34" 35" Ceiling height 8 Feet 9 Feet A*2 A*2 28-3/32" 29-3/32" 30-3/32" 31-3/32" 31-3/32" 32-3/32" 32-3/32" 33-3/32" 33-3/32" 34-3/32" 34-3/32" 35-3/32" 36-3/32" 37-3/32" 10 Feet *1 A*2 30-3/32" 31-3/32" 32-3/32" 33-3/32" 34-3/32" 35-3/32" 36-3/32" 37-3/32" NOTE Sometimes, sponge tape covers the holes. If the holes are located behind the sponge tape, simply insert the screw through the sponge tape. Step 3: • Mount the glass cover (2) onto the range hood (1). Use the allen key (13) to secure with 4 sets of bolts, rubber washers, and washers (9) (fig. ). fig. *1: with 10' extension chimney kit FW10EX60LS (16) (not supplied). Please call Frigidaire at 1.800.944.9044 to order this kit. *2: "Dimension A" in the chart represents the height from cook top to where the bottom screw mounting holes would be located. *3: Recommended mounting height Step 2: • Install the range hood (1) either with wood screws or long screws, depending on the wall type: Wall type Required screws Wood 4 wood screws (14) Brick/Concrete 4 long screws (10) Step 4: • Mount upper and lower brackets (4, 5) on the wall. Secure with the remaining 4 sets of long screws (10). The notches of the lower bracket should be facing up towards the ceiling (fig. ). • Attach the exhaust duct (fig. ). GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
8
GB
fig.
9.8”
9.3”
9.13”
0.9”
Long
screws
Wood
screws
10”
9.8”
7.5”
Ceiling
Wall
Dimension
A
(see table)
Desired range hood distance above a
36” high cook top
Ceiling height
8 Feet
9 Feet
10 Feet *
1
A
*
2
A
*
2
A
*
2
26”*
3
28-3/32”
27”*
3
29-3/32”
28”*
3
30-3/32”
30-3/32”
29”*
3
31-3/32”
31-3/32”
31-3/32”
30”*
3
32-3/32”
32-3/32”
32-3/32”
31”*
3
33-3/32”
33-3/32”
33-3/32”
32”*
3
34-3/32”
34-3/32”
34-3/32”
33”
35-3/32”
35-3/32”
34”
36-3/32”
36-3/32”
35”
37-3/32”
37-3/32”
*
1
: with 10’ extension chimney kit FW10EX60LS
(16)
(not
supplied).
Please
call
Frigidaire
at
1.800.944.9044 to order this kit.
*
2
:“
Dimension A
” in the chart represents the height
from cook top to where the bottom screw mounting
holes would be located.
*
3
: Recommended mounting height
Step 2:
•
Install the range hood (1) either with wood screws
or long screws, depending on the wall type:
Wall type
Required screws
Wood
4 wood screws (14)
Brick/Concrete
4 long screws (10)
•
Insert 2 screws (10 or 14) in the top location, but
do not fully insert the screws (fig.
). Mount the
range hood (1) to the wall and tighten the screws.
Insert and tighten the 2 remaining screws on the
bottom location of the range hood (fig.
/
).
•
Attach the collar (6) to the range hood (1). Secure
with 2 short screws (12) (fig.
).
0.08”
0.08”
fig.
fig.
fig.
fig.
fig.
NOTE
Sometimes, sponge tape covers the holes. If the
holes are located behind the sponge tape, simply
insert the screw through the sponge tape.
Step 3:
•
Mount the glass cover (2) onto the range hood
(1). Use the allen key (13) to secure with 4 sets of
bolts, rubber washers, and washers (9) (fig.
).
fig.
Step 4:
•
Mount upper and lower brackets (4, 5) on the
wall. Secure with the remaining 4 sets of long
screws (10). The notches of the lower bracket
should be facing up towards the ceiling (fig.
)
.
•
Attach the exhaust duct (fig.
)
.
Installing the hood