Frigidaire FPJB56B7MS Complete Owner's Guide - Page 4
Prior To Using Your Blender, How To Assemble Your Blender - parts
View all Frigidaire FPJB56B7MS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
PRIOR TO USING YOUR BLENDER CAUTION Unpack carefully. Blades are very sharp! 1. Carefully unpack the contents from the box. Check to make sure all pieces (as shown on page 3) are accounted for and that the blender appears to be free of any physical damage. If you discover any damage or missing parts, please contact our customer service department at 1-888-845-7330 prior to plugging in the unit. 2. Remove any printed material or tape from the blender. Inspect the jar to be sure there are no packaging materials or foreign materials inside. 3. After inspection, place the blender motor base upright on a countertop or table. 4. Before using, wash the lid, pouring insert cover, glass jar, gasket, and power blade assembly in warm soapy water or in a dishwasher. (To disassemble, see instructions on page 6.) Dry thoroughly. 5. Wipe the motor base with a damp cloth. 6. Assemble the blender following the instruction on this page. HOW TO ASSEMBLE YOUR BLENDER CAUTION Blades are very sharp. When handling the power blade assembly, hold assembly by its base. Avoid handling blades with your fingers. 1. Place the motor base on a flat, dry surface. 2. Assure that the motor in turned off and the power cord is unplugged. 3. Turn the glass jar upside down on a flat, sturdy surface. 4. Place the gasket over the jar bottom opening. 5. Insert the power blade assembly into the jar opening. 6. Place the locking collar on top of the blade assembly and twist clockwise to lock firmly. 7. Turn the jar upright and place it on the motor base. 8. Place the lid on top of the jar. Insert the pouring insert cover into the blender lid and turn until it locks. 9. Plug the power cord into a 120-volt outlet. Your blender is now ready to use. CAUTION Add food or liquid while the blender is running only by lifting the pouring insert cover and dropping in the ingredients. Never remove the lid while blender is running. 4 sket er blade nder g Collar Locking Collar Power Blade Assembly Gasket Glass Jar