Frigidaire FPJB56B7MS Complete Owner's Guide - Page 8

PROBLEM SOLVING Problem Blender does not turn on. Food is spattering outside the jar. The motor base is bogging down. Blender jar is leaking at the bottom. Solutions • Check to be sure the power plug is securely inserted into the outlet. • Make sure the ON/OFF pad is illuminated. If not, press ON/OFF to turn blender on. • Touch the desired speed. • If blender still does not turn on, check for a blown fuse or reset the circuit breaker. • Be sure the lid is on the jar securely before blending. • Operate the blender on low setting while you remove the pouring insert cover to add new ingredients. • Do not overload the jar. If the jar is too full, turn the blender off and remove some of the mix. • Be sure the blender is not overloaded. If the jar is too full or mixture is very thick, turn off the blender, remove some of the mix, and re-start the process. • Cut foods into even-sized pieces, 1/2- to 1-inch cubes, before processing. • When using the 'Smooth' or 'Crush' setting, break any large chunks of ice into smaller pieces before adding to blender. • Be sure the gasket is in place between the jar and the power blade assembly. • Check the locking collar to be sure it is aligned properly and securely fastened to blender jar. 8