Frigidaire FPJB56B7MS Complete Owner's Guide - Page 6

CLEANING YOUR BLENDER ¬ IMPORTANT Unplug the blender from electrical outlet before cleaning. • To disassemble, empty the jar and turn upside down. Turn locking collar counter-clockwise to unlock. Lift of locking collar, power blade assembly and gasket. • Handle the power blade assembly carefully. It is SHARP and may cause injury. Do not attempt to remove blades from cutting assembly. • Wipe the motor base with a soft damp cloth and dry it thoroughly. • Wipe the power cord with a damp cloth. • Wash the jar, lid, pouring insert cover, gasket, blade assembly and locking collar in warm soapy water. If there are any stubborn foods, use a brush to free residual food. Rinse all parts and dry thoroughly. • If you desire, the jar can be washed using the dishwasher on a normal cycle, in upside-down position. Lid, pouring insert cover, gasket, power blade assembly and locking collar are also top-rack dishwasher-safe. • You may also wash the power blade assembly by adding 1 cup of warm soapy water to blender jar. Operate on 'Low' speed for 30 seconds. Empty jar. Add clear warm water and operate another 30 seconds to rinse. Carefully disassemble parts, rinse in clear warm water and dry thoroughly. • For stubborn or strong stains and odors: Soak the jar and lid for 5 minutes in a detergent solution. Rinse with clear warm water and dry thoroughly. sket er blade nder g Collar Locking Collar Power Blade Assembly Gasket Glass Jar CAUTION Never submerge the motor base in water or another liquid. Never place the motor base in a dishwasher. The motor base is designed to be resistant to liquids, but must not be submerged in water. CAUTION • Never use scouring pads or abrasive cleaners on the motor base, as this can scratch or damage the finish. • Do not use bleach solutions to clean the motor base, as bleach can damage the stainless steel finish. 6