Frigidaire FRSS2323AD Complete Owners Guide - Page 15

15 CONTROLS AND SETTINGS  NOTE Your appliance may have some or all of the features listed below. Become familiar with these features and their use and care. Front of Door User Interface Cube Crush Light Water Water Filter Status Air Filter Status* Press the Cube button to get cubed ice. A white LED light will indicate the mode is selected. Press glass against the ice dispensing paddle as far up as possible to catch all the ice. Press the Crush button to get crushed ice. A white LED light will indicate the mode is selected. Press glass against the ice dispensing paddle as far up as possible to catch all the ice. Press the light button to turn on the dispenser light. A white LED light will indicate the dispenser light is on. Press again to turn the light off. To operate the water dispenser, press a glass against the Water dispensing paddle. To stop dispensing water, pull the glass away from the dispensing paddle. Dispensed water is not cold. For colder water, add crushed ice or cubes before dispensing water. When you need to order a new water filter, the side door UI will change to the Order status. When you need to replace the water filter, the Side Door UI will change to the red replace status and the front UI will display Replace Water Filter. After you change the filter, hold the Water Filter button for 3 seconds to reset. When you need to order a new air filter, the Side Door UI will change to the Order status. When you need to replace the air filter, the Side Door UI will change to the red Replace status and the Front UI will display Replace Air Filter. After you change the filter, hold the Air Filter button for 3 seconds to reset. *Only on some models