Frigidaire FRSS2323AD Complete Owners Guide - Page 19
Automatic Ice and Water Dispenser
View all Frigidaire FRSS2323AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
19 AUTOMATIC ICE AND WATER DISPENSER Priming the water supply system Turning the ice maker on CAUTION For proper dispenser operation, the recommended water supply pressure should fall between 30 psi and 100 psi. Excessive pressure may cause the system to malfunction. To turn the ice maker on, press the ice maker's On/Off power switch, located on the front of the ice maker, so the LED is steadily illuminated. 1. Begin filling the system by pressing and holding a drinking glass against the water dispenser paddle. Power Outage Cube Door High Open Temp RReepplalacceeWAairteFrilFtielrter Crush WATER ICE IMPORTANT 2. Keep the glass in this position until water comes Dispenser (varies by model) out of the dispenser. It may take about 1½ minutes. Water will sputter until you purge all air from the water lines. Turning off the ice maker simply disables ice making. You will still be able to dispense existing ice, and you will still be able to dispense water. NOTE 3. Continue dispensing water for about 4 minutes to flush the system and plumbing connections of any impurities (stopping to empty the glass as necessary). The ice maker also has a built-in plastic signal arm that automatically stops ice production when the ice bin is full. Do not use this signal arm to manually stop the ice maker. NOTE Dispensed water is not chilled. For colder water, add ice to cup or container before dispensing water. Ice maker operation & care After you properly install the refrigerator and it has cooled for several hours, the ice maker can produce ice within 24 hours. The ice maker will fill the ice bin from the rear. You must dispense some ice to force the ice forward in the bin. This will allow the bin to fill completely.