Frigidaire FRSS2323AD Complete Owners Guide - Page 18
In-Door Control Display Mode Views, Temperature, Adjustment, Coldest, Air Filter, Status, Order
View all Frigidaire FRSS2323AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 CONTROLS AND SETTINGS In-Door Control Display Mode Views Your display is equipped with a sleep and inactive mode to prevent accidental changes to the unit settings during opening and closing of the doors. When both doors are closed, the display will be in sleep mode. When either door is first opened, the display will be in inactive mode where all the current settings are visible but dimmed. Pressing any button on the display will activate the display and a tone will be played. All settings will then be fully lit. Touch the display again to change any setting. If there is no button pressed for 10 seconds while any door is open, the display will default back to inactive mode. Temperature Adjust the temperature gradually: adjust in small increments, allowAdjustment ing the temperature to stabilize. • For colder temperatures, press the Temp button to change the temperature setting toward Coldest. • For warmer temperatures, press the Temp button to change the temperature setting toward Cold. Adjusting the refrigerator control will change temperature in both compartments. The freezer control can be left at the factory preset (*Recommended) or adjusted as desired. To maintain temperatures, a fan circulates air in the refrigerator and freezer compartments. For good circulation, do not block cold air vents with food items. Air Filter Status* The display shows the current status of the air filter (Good, Order, or Replace). To reset the filter status to Good, press and hold Air Filter for 3 seconds. Water Filter The displays shows the current status of the water filter (Good, Status Order, or Replace). To reset the filter status to Good, press and hold Water Filter for 3 seconds. *Only on some models