Frigidaire GAH12ER2T Installation Instructions - Page 7

Wall Sleeve Brands: #6 Whirlpool 171⁄8"Deep Rear Louvers 60° 1. Redirect the louvers at the back of the wall sleeve as shown in the 10" illustration. The use of pliers is recommended. 60° 9-1/2" Top View ← 10"‹ → ← 61⁄2"‹→ 2 3 ← 61⁄2"‹→ 2. Cut (2) Tapered Spacer Blocks and install as shown in the illustration. To attach the blocks remove the backing paper from the blocks. Do not touch adhesive on the blocks. Press the blocks firmly in place. 17" 1" 3/4" Tapered Spacer Block Cut Here 13" Protection Paper Backing 3. Cut and attach the (1) 11⁄2"x 3/8"x 261⁄2"long seal to 251⁄2"long. Attach the (2) 11⁄2"x 3/8"x 14"long seals as shown. 4. Attach 1"x 3/4"x 14"long seal to the louvered panel as shown in the illustration. 3 5 4 5. Install the new unit into the wall sleeve. Attach the ground wire to the unit as shown. 6. Install the 1"x 11⁄2"x 84"long stuffer seal between the wall sleeve and the unit. A flat bladed screwdriver or putty knife is recommended. 6 6 8. Assemble and install the Trim Frame. (see Trim Frame) 7