Frigidaire PRMC2285AF Complete Owners Guide - Page 14
CAUTION, Door Handle Mounting Instructions for Frigidaire Professional® - professional refrigerator
View all Frigidaire PRMC2285AF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 DOOR HANDLE INSTALLATION CAUTION Wear gloves and safety goggles. Use extreme CAUTION when installing these handles. Door Handle Mounting Instructions for Frigidaire Professional® 1. Remove handles from carton and any other protective packaging. 2. Position fresh food handle end over upper and lower preinstalled shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3. While holding handle firmly against door, fasten further most upper and further most lower Allen set screws (B) with supplied Allen wrench. 4. Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are facing towards the first door. 5. Firmly tighten the inside Allen set screws. Mounting Refrigerator Handles NOTE When tightening the Allen set screws, it is imperative that force be applied to the longer arm of the Allen wrench supplied in the handle packaging. NOTE All set screws should be tightened so the screw is below the surface of the handle. The handles should be drawn tight to doors with no gaps. Opening the opposite door while tightening the Allen screw makes installation easier. The door handle may loosen over time or if it was installed improperly. If this happens, tighten the set screws on the handles.