Frigidaire PRMC2285AF Complete Owners Guide - Page 30

30 STORAGE FEATURES CAUTION To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change. Allow the glass shelves to stabilize to room temperature before cleaning. Do not wash in dishwasher.  NOTE Features may vary according to model. Shelf positions can easily be adjusted in the fresh food compartments as needed. The shelves have mounting brackets that attach to slotted supports at the rear of each compartment. Change the Position of a Shelf 1. Remove all food from shelf. 2. Lift the front edge up and pull the shelf out. 3. Replace by inserting the mounting bracket hooks into the desired support slots. 4. Lower the shelf and lock into position. To adjust flip shelf: 1. Remove food from shelf. 2. Lift the right side edge of shelf upwards and push to the left towards ice maker. To adjust slide-under shelf (some models): 1. Push front half shelf backward towards rear of cabinet until the rear half shelf drops down, Slide-Under Shelf then gently continue pushing front half shelf back and under the rear half shelf. Drawers The refrigerator includes a variety of storage drawers. CrispSeal Drawer Crisper drawers are designed for storing fruits, vegetables, and other fresh produce. Crispers have an auto humidity control on the side of each crisper under the humidity control cover. Frigidaire Gallery Models To remove the auto humidity control membrane for cleaning: 1. Reach to back of humidity control cover. 2. Pull up on cover. 3. Pull cover towards back of cabinet and remove. 4. Clean humidity membrane with hot soapy water. 5. Replace membrane and cover by reversing the steps above. Repeat for both crispers. Auto Humidity Membrane Crisper Flip Shelf Crisper Removing Auto Humidity Control Membrane