Frigidaire PRMC2285AF Complete Owners Guide - Page 28

28 AUTOMATIC ICE AND WATER DISPENSER 4. Allow the ice bin to dry completely before replacing in the freezer. 5. Replace the ice bin. Turn the ice maker on. Remove and empty the ice bin if: • An extended power failure (one hour or longer) causes ice cubes in the ice bin to melt and refreeze together after power is restored, jamming the dispenser mechanism. • Ice dispenser is used infrequently. Ice cubes will freeze together in the bin, jamming the dispenser mechanism. Remove the ice bin by (1) lifting upward and (2) pulling straight out, then shake to loosen the cubes or clean as explained above. (2) Pull Bin Straight Out Freezer Ice Maker (select models) Ice Maker Operation & Care After the refrigerator is installed properly, the ice maker can produce ice within 24 hours. When using the ice maker for the first time, and in order for it to work properly, it is necessary to clear air from the water tubing and the filter. Furthermore, if the system is not flushed, the first ice cubes may be discolored or have an odd flavor. Once the ice maker begins making ice, allow the bin to fill completely, then discard the first FULL bin of ice. Ice Maker and Storage Bin Capacity This ice maker should produce between 2 and 2.5 pounds of ice per 24 hours depending on usage conditions. The ice bin will hold about 4.5 pounds of ice. U(1p)wLairftd  NOTE The ice maker will only produce the ad- vertised production rate if the product is set at 0°F. Removing Ice Bin Turning the ice maker on and off Press power button to turn Ice Maker on (button should be illuminated).