Frigidaire PRMC2285AF Complete Owners Guide - Page 31

31 STORAGE FEATURES Frigidaire Professional Models To remove the auto humidity control membrane for cleaning: To remove the Auto CrispSeal drawer for cleaning: 1. Pull the drawer out until it stops. 1. Reach to back of humidity control cover. 2. Lift the front slightly and remove the drawer. 2. Place fingers between the humidity control and the back wall, pull up on cover. 3. Pull cover towards the front of cabinet and remove. 4. Remove the humidity membrane from the housing by lifting up sliding over. 5. Clean humidity membrane with hot soapy water. 6. Replace membrane in housing and unit by reversing the steps above. Removing Auto CrispSeal Drawer SnackZone - Recessed Snack Drawers These drawers are ideal for storage of deli meats and cheeses. To open: slide back the cover to allow access to the drawers. Removing Auto Humidity Control Membrane  NOTE Frigidaire does not recommend replacing the auto-humidity membrane unless it becomes damaged or ruined. If the membrane becomes soiled, it can be washed with soap and water. Ensure membrane is dry before replacing in unit. Opening SnackZone Recessed Snack Drawers