Fujitsu 4340C Cleaning & Maintenance - Page 24

I Button/LED Function Name of the button and LED Function Button Next Displays the next LCD screen. Previous Displays the previous LCD screen. Moves the cursor to the left. Moves the cursor to the right. Exit When you are entering settings on the Operator panel, pressing this button returns you immediately to the Scanner Ready screen. Enter Enters the parameter currently selected by the cursor. Send To/ Start Operational only when Manual start mode is set or the Read lamp lights; Starts the reading when video interface option is used. Some application software packages make use of this button. Stop When the Check LED lights, pressing this button releases the error status (turns off Check and returns to the Scanner Ready screen). Operational only during the reading operation; stops the reading when the video interface option is used. Also turns off the Check lamp. LED Indicates that the scanner is On. Read Check Indicates the scanner is reading or ready to read. • If lit, this indicates that an alarm occurred. Pressing the Stop button turns the Check lamp Off. • If it blinks at one second intervals, this means that a jam or double feed has been detected. If the problem is jammed paper, removing the jammed paper turns off the Check lamp. If the problem is double feed, pressing the Stop button turns off the Check lamp. • If it blinks at four seconds intervals, this means that cleaning the ADF is necessary. G 1-6