Fujitsu MAS3735NC Manual/User Guide - Page 32
Mean Time to Repair MTTR, 51°C to 55°C
UPC - 000004309314
View all Fujitsu MAS3735NC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Failure of the equipment means failure that requires repair, adjustments, or replacement. Mishandling by the operator, failures due to bad environmental conditions, power trouble, host system trouble, cable failures, or other failures not caused by the equipment are not considered. (2) Mean Time to Repair (MTTR) MTTR is the average time taken by a well-trained service mechanic to diagnose and repair a drive malfunction. The drive is designed for a MTTR of 30 minutes or less. (3) Service life The service life under suitable conditions and treatment is as follows. The service life is depending on the environment temperature. Therefore, the user must design the system cabinet so that the average DE surface temperature is as possible as low. • DE surface temperature: 40°C or less • DE surface temperature: 41°C to 45°C • DE surface temperature: 46°C to 50°C • DE surface temperature: 51°C to 55°C • DE surface temperature: 56°C to 60°C • DE surface temperature: 61°C and more 5 years 4.5 years 4 years 3.5 years 3 years Strengthen cooling power so that DE surface temperature is 60°C or less. Even if the IDD is used intermittently, the longest service life is 5 years. Note: The "average DE surface temperature" means the average temperature at the DE surface throughout the year when the IDD is operating. (4) Data security at power failure Integrity of the data on the disk is guaranteed against all forms of DC power failure except on blocks where a write operation is being performed. The above does not applied to formatting disks or assigning alternate blocks. 2-6 C141-E185