Fujitsu MAS3735NC Manual/User Guide - Page 73
INSTALLATION, 5.1 Notes on Handling Drives
UPC - 000004309314
View all Fujitsu MAS3735NC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
CHAPTER 5 INSTALLATION 5.1 Notes on Handling Drives 5.2 Connections 5.3 Setting Terminals 5.4 Mounting Drives 5.5 Connecting Cables 5.6 Confirming Operations after Installation and Preparation for Use 5.7 Dismounting Drives 5.8 Spare Disk Drive This chapter describes the notes on handling drives, connections, setting switches and plugs, mounting drives, connecting cables, confirming drive operations after installation and preparation for use, and dismounting drives. 5.1 Notes on Handling Drives The items listed in the specifications in Table 2.1 must be strictly observed. (1) General notes a) Do not give the drive shocks or vibrations exceeding the value defined in the standard because it may cause critical damage to the drive. Especially be careful when unpacking. b) Do not leave the drive in a dirty or contaminated environment. c) Since static discharge may destroy the CMOS semiconductors in the drive, note the following after unpacking: • Use an ESD strap and body grounding when handling the drive. • Do not touch any components on the PCAs except setting terminal (CN1 and CN2). CAUTION Hot temperature To prevent injury, do not handle the drive until after the device has cooled sufficiently after turning off the power. The DE and LSI become hot during operation and remain hot immediately after turning off the power. C141-E185 5-1